SimXperience DIY Motion rig - This has been my project for the last many months, I wanted to build a small form factor 3DOF motion simulator for sim racing. There is still a bit to do, I am waiting on a delayed delivery of my Fanatic shifter, and I would like to get a real seat at some point. Anyway, here is the hit list:
- Fanatec CSW V2 Wheel Base
- Fanatec ClubSport Steering Wheel Porsche 918 RSR
- Fanatec ClubSport Pedals V2
- Fanatec ClubSport Handbrake
- Fanatec ClubSport Shifter SQ V1.5 coming soon
- Fanatec CSL Seat to be replaced
- SimXperience 150mm SCN5 Motion Starter Kit
- Extra SCN5 for rear traction loss
- SimXperience Universal Motion Seat Kit
- SimXperience Sim Commander + SimVibe
- 2x Buttkicker LFE
- Crown XLS1500
- Whole lot of 8020 aluminum extrusion, and stainless steel bolts
- UHMW stock (for traction loss sliding surface across the back)
![](https://67.media.tumblr.com/e31f490ffff3b859adef05c63d81cc57/tumblr_nlc1tirlfW1rgpsuzo1_1280.jpg)
![](https://65.media.tumblr.com/a33d80f775997c3142ef5adb9dc07168/tumblr_nlc1tirlfW1rgpsuzo2_1280.jpg)
![](https://67.media.tumblr.com/cb141618375a5f185ab3f31e44cbfb6f/tumblr_nlc1tirlfW1rgpsuzo3_1280.jpg)
![](https://67.media.tumblr.com/2110973d9d963d038c5eeea15123930a/tumblr_nlc1tirlfW1rgpsuzo4_1280.jpg)
![](https://67.media.tumblr.com/e57ce42dca1d5085b1e3cb26db8902c9/tumblr_nlc1tirlfW1rgpsuzo5_1280.jpg)
![](https://66.media.tumblr.com/fc1902489d22e3b5f9052b69f8ee2c2b/tumblr_nlc1tirlfW1rgpsuzo6_1280.jpg)
![](https://67.media.tumblr.com/6fae55299ed8e3fda700e957a748ff46/tumblr_nlc1tirlfW1rgpsuzo7_1280.jpg)
![](https://67.media.tumblr.com/f976e10fde7ca5b35ad5d9d60fe29b6a/tumblr_nlc1tirlfW1rgpsuzo8_1280.jpg)
![](https://67.media.tumblr.com/3749ca4b0e7cbfded98563bc39ed3b8f/tumblr_nlc1tirlfW1rgpsuzo9_1280.jpg)